One metal is not the other. Not only when we talk about the different types, but also when it comes to qualities and applications. Visiting Arno van Wijnen, we hear about titanium. A metal that is highly valued in a number of exciting markets thanks to its special properties. Aerospace, for example. "Titanium in the aircraft industry in particular is a fast-growing market that is very strictly regulated."
Titanium - or as it is also called, titanium - is a raw material present in about two per cent of the Earth's crust. It is extracted from the mineral ilmenite and rutile. In meteorites and rocks brought back by astronauts from the Apollo missions, we find significantly higher concentrations than on Earth, but titanium is found in low concentrations in all living forms on Earth, including humans. But that provides fodder for yet another topic.
Beloved material
Titanium is such a popular material because of its properties. It is very strong, light and corrosion resistant and can withstand extreme temperatures and temperature fluctuations. Van Wijnen: "The quality of the material is mainly determined by the production method and the alloy composition. For each application, optimal compositions apply because of the properties obtained as a result. And for each application, there are very strict standards the material must meet. In the aircraft industry, the US AMS standards in particular are used. Even better is the material designation according to UNS - Unified Numbering Systems for Metals and Alloys - followed by a letter. By the way, I also find this one the clearest. Deliveries for major aircraft manufacturers are made in large and long-term contracts where those standards are used as a guide."
In those contracts of aircraft manufacturers, not only the standardisation of the material is defined, but also its origin. For a supplier, it is further important what the added value to the material is, to determine what certification you need to be able to supply products. In Europe, besides the standards for individual materials, the standards for the quality management system, the QMS, of the European Association of Aerospace Industries apply. If you don't change anything about the material properties, then AS9100 will suffice. If you do, then you need to start looking at AS 9110 and AS 9120.
Better production methods
Van Wijnen explains that unlike some other raw materials, the cost price of titanium has come down considerably in recent decades. "Whereas in 1980 the price was still 20,000 euros per kilo, now it is around 30 euros and that price is still dropping. This is mainly due to improved production methods, making it easier to extract."
The processing and machining of the material largely determine the final quality and strength. "In particular, the production method of the alloy provides the atomic stacking which in turn is important for the bending and tensile strength. This means that 3D printing with titanium does not yet give the right strength for all aerospace applications, but developments are going very fast."
Depending on the atomic structure of titanium, the material can or cannot be processed in a certain way. That atomic structure or microstructure is divided into three classifications, here also called phases: Alpha, Alpha-Beta and Beta.
Alpha-titanium is not ductile, but it is readily weldable. It has low-to-medium strength, good fracture toughness and good mechanical properties at cryogenic temperatures.
Alpha-Beta titanium has limited cold ductility and good hot ductility. Has medium to high strength and lower creep strength at high temperatures than Alpha-titanium.
Beta-titanium has a high percentage of stabilising elements. These titanium grades can be heat-treated and then give high strength. Moreover, these grades are very deformable in the so-called solution annealed state.
Edit
"Another property of titanium is that it is a reactive material," Van Wijnen continues. "That means it oxidises very quickly in the outside air, but that oxide layer then immediately serves as a protective layer. Anyway, machining titanium is an art in itself. You have to use tools made of special material, such as carbide, for this, and look very carefully at the effects of the desired operation on the material. As titanium has poor thermal conductivity, heat develops mainly at the point of intersection. The material also tends to stick to the tool, chips stick to the tool as a result. If you machine too carefully, you can actually conjure up problems because the top layer of the material has a strong surface tension, making the deformation much less controlled than you would like. The material has a strong tendency to cold brace, with all the consequences that entails. So you should try to cut below the cold-strengthened layer. And cool it well!"
Cooling under high pressure, which makes the chip break more easily, then works best. "At the moment, experiments are taking place with using liquid nitrogen in machining. With this, you should be able to achieve higher cutting speeds with less tool wear. And we are talking about expensive tools here, so that is worth experimenting with."
And then, according to Van Wijnen, who could just spend hours talking about this, turning - or milling - is another machining method with the fewest machining - well, let's call it challenges.

Cutting edge assembly
By: Janet Kooren